Reference Manual Rev 1.13
Page 20 004R-646-113
Code Description
1 Parent Menu
2 Item Name
3 Menu Level
4 Item Data - If this is blank then the Item is a sub-menu.
4.4. Changing Data
Menu items containing data are shown along with their data (strings may show the
first few characters only). This data can be changed by using the editing keys.
When editing is finished, press the OK key to accept the new data. If the new data
is unwanted, press the cancel key (Sometimes several presses are required). While
editing, the type of data being edited is shown in the top right corner of the LCD.
4.5. Numeric Entry
Using the keypad, enter the desired number and press the OK key. Upper and
lower limits are placed on some entries and an entry outside this range will cause
the instrument to display dashes (i.e. - - - -).
Example: When in Setup follow the steps below to set Scale:Build:Capacity 1.
Press <ZERO> repeatedly to display the SCALE menu.
Press <TARE> repeatedly to display the BUILD menu.
Press <GROSS/NET> repeatedly to display the CAP1 item and the current setting
(eg. 30.00kg).
Enter the new capacity using the keypad.
Press <OK>
To Next Page
Loading...
