Rinstrum R427 - Page 128

Reference Manual Rev 1.13
Page 128 004R-646-113
Name Address Type Description
Response (ok): 81100103:00000000
Send (status?): 20110021
Response (calibrating): 81110021:0000A400
Send (status?): 20110021
Response (calibrating): 81110021:0000A400
Send (status?): 20110021
Response (not calibrating): 81110021:00008400
Clear Linearity * 0105
H
261
d
Execute This register clears a previously entered
linearisation calibration. There are 10
linearisation points [numbered 0 .. 9] which
can be cleared separately. The linearisation
point to clear is sent as a parameter.
Example:
Sent (Clear 1st point): 20100105:0
Response (ok): 81100105:00000000
Direct zero calibration* 0106
H
262
d
Execute This register is used to perform a direct zero
calibration in the same way as the direct zero
calibration via the menus. A direct zero
calibration is very fast and the display may
not change in the same way as a zero
calibration.
The mV/V value is sent as a parameter. It is
sent as mV/V x 10000. Example:
• 0.5mV/V → 5000 → 1388H
• 1.0mV/V → 10000 → 2710H
• 2.5mV/V → 25000 → 61A8H
Example:
Sent (0.5mV/V): 20100106:1388
Response(ok): 81100106:00000000
Direct span calibration* 0107
H
263
d
Execute This register is used to perform a direct span
calibration in the same way as the direct span
calibration via the menus. A direct span
calibration is very fast and the display may
not change in the same way as a span
calibration.
The mV/V value OF FULLSCALE is sent as a
parameter. It is sent as mV/V x 10000. E.g:
• 0.5mV/V → 5000 → 1388H
• 1.0mV/V → 10000 → 2710H
• 2.5mV/V → 25000 → 61A8H
Example use:
Sent (1.0mV/V): 20100107:2710
Response(ok): 81100106:00000000
Gross Weight 0149
H
329
d
Number Gross weight in counts
Net Weight 014A
H
330
d
Number Net weight in counts
Current Time/Date 0150
H
String Read this register to get instrument date/time