Reference Manual Rev 1.13
004R-646-113 Page 99
S2: Displays M/^ representing Motion / Stable, respectively.
S3: Displays Z/^ representing centre of Zero / Non-Zero, respectively.
S4: Displays - representing single range.
S5: Displays “ “/”m”/”c” representing Stable / Motion / Overload or Underload
Mode: Displays “_g__” or “_n__” for gross or net weight.
S6: A single character for units, displays L for pounds, K for Kg, T for ton, G for
gram
S7: Displays G/N representing Gross / Net, respectively.
S8: Displays O/M/I representing over/underload / Motion / Error, respectively.
‘ADDR CMD REG : DATA’: This is the same format as the response from a READ
FINAL network command. The SOURCE setting selects which register is selected.
SP: Space character, “ “
CONSEC: Consecutive print ID
DATE, TIME: Date and time.
TRACE: Traceable displayed weight.
To Next Page
Loading...
