Page 4
Back-up Communication
Utilizing the Cloud as the main route for communicating (reporting) to the monitoring
station and smartphone / Web application users. If the Cloud fails, the system utilizes the
backup mode to communicate. Either GSM/GPRS or IP can be designated as the primary
communication channel that is connected via the Cloud, and likewise, either GSM/GPRS or
IP can be designated as the “backup.”
Communication Channels
The WiComm Pro system communicates with monitoring stations and/or to designated
contacts (smartphone / Web application users) via IP or GSM/GPRS communication
channels, for the purposes of remote monitoring, system-control and operation (such as
system setting/programming, arming, maintenance, receiving alarm event and status
notification, viewing history log, bypassing detectors, and receiving visual verification).
GSM/GPRS
GSM/GPRS can be used as the primary communication channel, or as a back-up to the IP
communication channel. The GSM /SPRS module support multi channels.
IP/Wi-Fi
Using IP/Wi-Fi as a communication channel enables system communication over a TCP/IP
network. IP/Wi-Fi can be used as the primary communication channel or as a back-up
channel to GSM/GPRS. The GSM /SPRS module support multi channels
Monitoring Stations
Reporting events to monitoring stations can be done via the Cloud (RISCO or OEM
Cloud) or directly from the WiComm Pro system to the monitoring station using the
RISCO IP Receiver. Events can be reported in SIA/IP, SIA and Contact ID monitoring
protocols. In addition, WiComm Pro can send events in SIA IP protocol over TCP/IP to
monitoring stations that have standard IP receivers.
To Next Page
Loading...
