Risco RW332M - Controls

Page 72
UO Control
Assign outputs that will be activated by a long press on keys on the
bidirectional keypad.
Notes:
Outputs can be assigned only if I/O is assigned to the system.
Each keypad can activate different outputs.
Only outputs defined as Follow Code can be activated by the keypad keys
Mode (for the Wireless 2-Way Slim Keypad only)
Use this parameter to define the wireless 2-way slim keypad operation mode.
1. Arm/Disarm: the slim keypad is to have full user control of the system.
2. Bypass: designed for the Danish market; the slim keypad is to operate in
bypass mode.
Door Bell Sound (only for slim keypad)
Use this parameter to define the chime sound (broadcast by the main panel) when the
slim keypad door chime button ( ) is pressed as follows:
• None
• Chime sound 1/2/3
Controls
Controls defines programming options that are used for all keypads.
Keypads: Controls
Parameter
Default
Range
RF Wake-up
NO
Determines whether the system can wake the keypad up during exit/entry times or
when failing to set the system.
YES: The system wakes the keypad.
NO: The system cannot wake up a keypad. Use this option to save battery life. (Default)
Supervision
NO
Choose if the keypad will be supervised or not