Displays the results of the last measurement performed after the last transmission. To
receive an updated signal strength, activate the remote control prior to performing the
communication test.
For successful communication, the strength of the signal should be higher than the noise
threshold level as measured during calibration of the main panel.
Displays the results of the last battery test performed after the last transmission. OK
message is displayed for a successful test. For an updated value activate the device.
This menu displays information regarding the 2-way remote control's version.
Displays the results of the last measurement performed after the last transmission. To
receive updated signal strength, activate the keypad prior to performing the
communication test.
For successful communication, the strength of the signal should be higher than the noise
threshold level as measured during calibration of the main panel
Displays the results of the last battery test performed after the last transmission. OK
message is displayed for a successful test. For an updated value activate the device.
This menu displays information regarding the keypad's version.
To Next Page
Loading...
