Remote Control Parameters – 1-Way Key Fob
Set the operation of button 4 (Large blank button) of the key fob from the following
options:
• None: Button disable
• Arm: The button is used for Away (Full) arming of the key fob‘s partitions
• Stay: The button is used for Stay (Home) arming of the key fob‘s partitions
• UO Control (1-20): The button is used to operate a Utility Output
Wireless Two-Way Remote Control Parameters
The Wireless 2-Way Remote Control is an 8-button, rolling code wireless transmitter that is
designed for remote system operation. Having bi-directional functionality enables each
command that is sent to the panel to receive a reply status indication back from the panel
using its multi-color LED and internal buzzer. For higher security, commands can be
defined to be activated with a 4-digit PIN (personal ID number).
Remote Control Parameters –2-Way Remote Control
A label identifying the user of the remote control.
The internal ID number of the remote control. Each wireless device has its own unique
serial number. Placing ID 00000000000 will delete the remote control.
Assign the relevant partitions for the selected remote control.
4-digit PIN code used for higher security when sending commands from the remote
control. The code can be comprised from digits 1,2,3,4.
Note: The use of the PIN code depends on the control Quick UO or system control Quick Arm
Define whether sending panic alarm from the remote control is permitted. If permitted,
pressing on keys and simultaneously for 2 seconds on the remote control
will send a panic alarm.
To Next Page
Loading...
