Entry Bypass 45 seconds (15–240)
When the Wireless 2-Way Slim Keypad reader is defined as bypass mode, this timer
defines the period during which an Open Delay Zone Type (typically a door) can be
opened without triggering an alarm event.
Service Time 20 minutes 0-240 minutes
The time period that all tampers (main panel and accessories) can be opened for
purposes of battery replacement without triggering a tamper alarm (see Service Mode,
under Activities Menu, page 113).
Controls
The Control menu contains parameters that control specific system operations.
YES: Eliminates the need for a user code when arming (full or partial) the system by a
keypad or 2-way remote control.
NO: A valid user code is required for arming using a keypad or remote control.
YES: Permits zone bypassing by authorized system users after entering a valid user code.
NO: Zone bypassing is NOT permitted.
YES: A user code is not required before pressing the status button on your wireless
keypad or bi-directional remote control.
NO: A user code is required to activate the status key.
YES: A false code report is sent to the monitoring station after five successive attempts at
arming or disarming in which an incorrect user code is entered. No alarm sounds at the
premises, but a trouble indication appears. The wireless keypad will be locked for 30
minutes.
NO: A local alarm is sounded at the premises.
To Next Page
Loading...
