Page 29
9. Controls: The WiComm Pro supports parallel channel reporting (via IP, GPRS or SMS) to
both the monitoring station and Follow Me users. Use this setting to decide if the panel
reports events to the monitoring station or Follow Me in parallel to the report to the
Cloud (assuming there is an additional communication channel available – IP, GPRS
SMS,), or only as a backup when the communication between the WiComm Pro and the
Cloud is not functioning.
Step 4: Registering to the RISCO Cloud
To be connected to the RISCO Cloud, the system must be registered. Registering to the
Cloud can be done by the Cloud administrator or via self-registration by the customer,
depending on the Cloud configuration. Registering with the RISCO Cloud enables the
customer to monitor, control and configure your WiComm Pro system from any location.
The self-registration process is as follows:
To Register to the RISCO Cloud
1. Go to www.riscoCloud.com/register
2. Fill in your first name and last name
3. Enter your email address as Login Name (required for 1st time activation).
4. Define password (minimum of 6 characters and at least one digit) and confirm.
5. Enter in the 15 digits Panel ID as it appears on the sticker located on the side of the
panel or as printed on the postcard that arrived with the panel. Do not enter hyphens.
6. Complete registration form and click the Register button.
7. To complete registration, click the link on the e-mail message received (the email
account you defined as Login Name).
To Login to the RISCO Cloud
1. Go to www.riscoCloud.com.
2. Enter User Name and Password (as supplied during the registration process).
3. Enter Grand Master code. Click the Enter button.
iRISCO App
Once the self-registration is complete, users can enjoy the iRISCO Smartphone app for
smart and easy control of their WiComm Pro system from any location. The next step is to
download the iRISCO app from the Apple App store or Android Play Store
Accessing the Web Application
Once the Cloud registration and initial login have taken place, system users can enjoy the
Web application. To access the Web Application:
Enter the Web page address supplied by service provider into your Web browser
To Next Page
Loading...
