Risco RW332M - System Settings

Page 46
System Settings
This option enables setting the system settings for language, specific standardization, and
more.
System: Settings
Parameter
Default
Range
Default Panel
Restores programming options to factory defaults.
The Default Panel option will be followed by questions regarding the defaults of the
labels and erasing wireless devices. Use to select your option.
Erase Wireless Device
Erase wireless devices without changing the system’s current programmed parameters.
Language
Sets the system language (for e-mail, SMS, and keypad)
Standards
EN 50131
NO
Sets the panel programming options in compliance with EN standards. See
Appendix F - EN 50131 & EN 50136 Compliance.
DD243
NO
Sets the panel programming options in compliance with DD243 standards.
CP-01
NO
Sets the panel programming options in compliance with CP-01 standards.
Customer
Modify here the 3-character system Customer ID as per label format. Changing
the Customer ID results in changing the system language and default settings
according to the predefined factory Customer ID settings. Use this setting to
alter the Customer ID specified upon first-time WiComm Pro start-up. Consult
with your RISCO representative to acquire the appropriate Customer ID.