Page 31
NOTE: If the Authorize Installer system bit is defined as YES, a Grand Master code is
required to authorize the installer to enter the programming mode. In this case
the Grand Master code should be entered after the installer code via the Grand
Master menu > Activities > Authorize Installer.
2. Use the keys to scroll through all the main installer menus:
1) Programming 6) Event Log
2) Testing 7) Macro
3) Activities
4) Follow Me
5) Clock
3. Press to select a main installer menu.
4. Use the keys to scroll through the list of all the sub-menus.
Programming Menu
• After selecting the Programming Menu, you can scroll between the following list
of its sub-menus:
1) System
2) Radio Devices
3) Codes
4) Communication
0) Exit
System
• The System sub-menu has the following options:
1) Timers
2) Controls
3) Labels
4) Sounds
5) Settings
6) Service Information
7) Firmware Update
8) Picture Server
To Next Page
Loading...
