Risco RW332M - Event Log Menu; Macro Menu; Macro Keys

Page 116
Clock
Parameter
Default
Range
Enables you to activate or deactivate preprogrammed schedules that were defined by
your installer. Up to 8 weekly programs can be defined in the system during which the
system automatically arms / disarms or activates utility outputs.
Note: The definition of the scheduling programs is done from the configuration software.
Automatic Clock
Used to get an automatic time update (NTP or Daytime) through the IP network or
GPRS.
Server
Select the Internet time protocol NTP or Daytime
Host
The IP address or server name.
Port
The server port.
Time Zone (GMT/ UTC)
Use the key to add an hour to the GMT/UTC time. Use the key to
subtract an hour from the GMT/UTC time.
Event Log Menu
Allows the viewing of significant system events including date and time. Scroll the list
using the arrow keys to view the events in the system.
Macro Menu
Macro Keys
WiComm Pro enables the installer or Grand Master to record a series of commands and
assign them to a macro. When the macro is pressed, the recorded commands are executed
from beginning to end. Up to 3 macros can be programmed to a system using the
LCD/Panda keypad or the WiComm Pro Configuration Software.
Before programming a macro, it is recommended to perform your required series of
commands, making a note of every key you press while doing so.
NOTES:
● Macros cannot be programmed to perform disarming commands
● Macros cannot be activated from slim keypad