alocate an authority level to a user according to the following list:
User: There are no restrictions in the number of user codes (as long as they do not exceed
the number of codes remaining in the system). The user has access to the following:
• Arming and disarming
• Bypassing zones
• Viewing system status, trouble, and alarm memory
• Activating designated utility outputs
• Changing his/her own user code
• Setting keypad's settings
Cleaner: The Cleaner code is a temporary code, which is to be immediately deleted from
the system as soon as it is used to arm. This code is typically used for maids, home
attendants, and repairmen who must enter the premises before the owner(s) arrive. These
codes are used as follows:
For one-time arming in one or more partitions
If first used to disarm the system, the code may be used once for subsequent arming
Arm Only: There are no restrictions in the number of Arm Only Codes (as long as they
don't exceed the number of codes remaining in the system). Arm Only Codes are useful
for workers who arrive when the premises are already open, but because they are last to
leave, they're given the responsibility to close the premises and arm the system. The users
with Arm Only codes have access for arming one or more partitions.
Duress: When coerced into disarming the system, the user can comply with the intruder's
wishes while sending a silent duress alarm to the Monitoring Station. To do so, a special
duress code must be used, which when used, will disarm the system in the regular
To Next Page
Loading...
