Risco RW332M - RISCO Cloud Server Settings

Page 112
GSM
GSM
Parameter
Default
Range
Signal (RSSI)
Displays signal level measured by the GSM module. (0=No signal, 5= Very high signal)
Version
Displays information regarding the GSM card version.
IMEI
View the IMEI number of the GSM module. This number is used for identification of the
WiComm Pro at the RISCO IP receiver when using GSM or GPRS communication.
IP Address
The IP address given to the GSM when used in the Listener mode.
IMSI
International Mobile Subscriber Identity (IMSI) is a number that uniquely identifies
every user of a cellular network. It is stored as a 64-bit field and is sent by the mobile
device to the network.
ICCID
Integrated Circuit Card Identifier is a SIM card that contains its unique serial number
(ICCID). ICCIDs are stored in the SIM cards and are also printed on the SIM card during
a personalization process.
IP Unit
IP Unit
Parameter
Default
Range
IP Address
View the IP address of the WiComm Pro
Version
View the version on the IP card
MAC Address
View the MAC address of the IP card. This number is used for identification of the
WiComm Pro at the RISCO IP receiver when using IP communication.
WiFi MAC Address
View the Wi-Fi MAC address of the IP card. This number is used for identification of the
WiComm Pro at the RISCO IP Receiver when using Wi-Fi communication.
WiFi test
View the received SSID (network name) and RSSI signal level: poor/fair/good/perfect.