Risco RW332M - Controls; Parent Control

Page 70
UO Key 1/2/3
Each remote control can activate up to 3 outputs. Assign to each of the keys 1-3 the
relevant output.
Controls
Controls are relevant for both types of remote controls / key fobs.
Remote Controls / Key Fobs – Controls
Control
Instant Arm
NO
YES: Away arming (Full arming) from any remote control will be instant.
NO: Away arming (Full arming) from any remote control will be delayed, following exit
delay 1.
Instant Stay
NO
YES: Stay Arming (Partial Arming) from any remote control will be instant.
NO: Stay Arming (Partial Arming) from any remote control will be delayed, following
exit delay 1.
Disarm + Code (For 2 Way Remote Controls)
NO
Defines if a PIN code is required to perform the disarm operation while using any of the
bidirectional remote controls.
Parent Control
The Parent Control option is used to monitor the activity of children. This option allows
you to monitor when the children arrive home and disarm the system or when they arm
the system in Away, using a remote control or the keypad. With each
activation/deactivation of the system a message is sent to a specified Follow Me number.
After selecting this option, using the key, define which of the remote controls are
authorized with this feature and which are not.