Risco RW332M - Product Specification

Page 6
Product Specification
Configuration
Maximum number of partitions
3
Maximum number of wireless zones
32
Maximum rolling-code remote controls / key fobs
8
Maximum wireless 2-way slim keypads
3
Maximum Follow Me numbers
16
Maximum user codes
32
Grand Master, Installer, and Sub-Installer codes
1 each
Maximum events in event log
1000
Maximum alarm sounders (internal/external)
3
Electrical
Electrical power requirement
230VAC, 50/60 Hz 0.6A max. or 14.4VDC, 2.5A
AC power supply cord
Diameter 14mm, conduit 16mm
Safety-approved, in compliance with IEC 60227
DC Connector
DC plug, 5.5x2.1x12mm small magnetic ring
Current consumption (at main panel)
166mA standby
Backup battery (inside main panel)
• Li-Polymer rechargeable battery pack 2350 mAh.
• Max. time to recharge to 80%: 34 hours
Low voltage signal at 7.2 VDC
Operating Temperature
Main panel, wireless PIR detector /
camera
-10°c – 55°c (14°F to 131°F)
Physical
Dimension (HxWxD) of main panel
197.5 mm x 152.5 mm x 52 mm
7.78 in x 6 in x 2.05 in
Weight
0.77 kg
Wireless
RF immunity
According to EN 50130-4
Frequency
868.65 MHz, 433.92 MHz (Security)
Camera Frequency
869.525 MHz, 916 MHz, 430 MHz
GSM G2, GSM G3 & GSM G4 Modules (RP512G2, RP512G3, RP512G4)
Current consumption
• Average: 30 mA;Peak: 130 mA