Risco RW332M - Setting WiComm Pro for SIA CP 01 Requirements

Page 146
SIA CP-01 Compliance
Compliance Statement
Hereby, RISCO Group declares that the WiComm Pro series of central units and
accessories are designed to comply with SIA CP 01.
The minimum requirement system for SIA-FAR Installations to comply with CP-01
standards:
A minimum of 1 keypad must be installed
1 CP-01 Control Panel (WiComm Pro main panel)
All system keypads must be audible (mute disabled).
Setting the WiComm Pro to comply with SIA CP 01 Requirements
1. Access the installer Programming menu.
2. From the [1] System menu select [5] to access the Settings menu.
3. From the Settings menu select [4] to access the Standard option.
4. Select CP 01; once selected, the following changes will occur in the WiComm Pro
software: