Risco RW332M - Sounds

Page 45
Sounds
Sounds contains parameters that enable you to set the sound(s) that will be produced by
the system after the following system events:
System: Sounds
Parameter
Default
Range
Tamper Sound
BELL/A Sil/D
1 to 6
Sets the sound(s) produced by a tamper violation according to the following options:
• Silent
• Bell (external/internal siren)
• Buzzer (main panel)
• Bell + Buzzer
• Bell/A Buzzer/D: Bell when system is armed, buzzer when system is disarmed
• Bell/A S/Disarm: Bell when system is armed, silence when system is disarmed
Local Speaker Alarm Volume
Level 5
0-5
Sets the main panel's internal speaker alarm volume. The volume ranges between 0 (silent)
to 5 (maximum volume). After setting/changing the volume, sound will be emitted by the
internal speaker to enable evaluation of the selected volume level.
Local Speaker Squawk Volume
Level 3
0-5
Sets the main panel's internal speaker squawk volume. The volume ranges between 0
(silent) to 5 (maximum volume). After setting/changing the volume, sound will be emitted
by the internal speaker to enable evaluation of the selected volume level.
Exit/Entry Beeps Volume
Level 2
0-5
Determines the volume of the beeps sounded from the main panel during the exit/entry
times.