Page 3
WiComm Pro Architecture
Traditional
WiComm Pro can communicate information to monitoring stations (and Follow Me
destinations) through various communication channels, depending on the physical
communication modules installed inside the main panel. Communication can be
established through IP/Wi-Fi, or GSM/GPRS. Communication can be direct or through the
RISCO Cloud.
All methods can be used for:
Reporting events to monitoring stations
Sending automatic notifications to the owner
Remote system programming and maintenance
Owner remote control
Cloud Communication
Wicomm Pro can be constantly connected to a dedicated application server (the “RISCO
Cloud”) via IP or GPRS.
The RISCO Cloud handles all communication between the WiComm Pro system,
monitoring stations and Smartphone/Web users, enabling remote monitoring and control,
as well as a RISCO’s VUpoint video verification solution that utilizes IP cameras:
Cloud communication can be defined as either parallel or back-up.
Parallel Communication
Reporting (event notification) can be sent in parallel through the Cloud and also straight
from the system to the monitoring station and end- users (Follow Me, smartphone and
Web application users) – via the designated communication channel (IP or GSM/GPRS).
To Next Page
Loading...
