Risco RW332M - Red Compliance Statement

Page 148
Feature
Range
Shipping
default
Quick Key / Remark
Entry Delay(s)
30 sec - 240 sec**
30 seconds
[1][1][1][1] / [1][1][2][1]
Abort Window -
for non-fire zones
May be disabled by
zone
Enabled
[2][0][4]
Abort window-
for non-fire zones
15 sec - 45 sec**
30 seconds
[5][6][0][1]
Abort
annunciation
Annunciate that no
alarm was
transmitted
Enabled
LCD Display message
Communication
Cancel window
5-255 minutes
005 minutes
[5][6][0][2]
Duress feature
Not a duplicate of
other user codes
Disabled
[4][1] Can define dedicated
user with authority level
Cross zoning
(XX) sec 1-9 minutes
Disabled
[2][7]
Swinger
shutdown
For all non-fire
zones, shutdown at
1 or 2 trips
One trip
[5][6][8]
Fire alarm
verification
Depends on sensors
Enabled
[1][2][10]
Call waiting
cancel
Depends on user
phone line
Disabled
(Empty string)
[5][6][0][3]
String required for
activation
System test (test
report + walk test
mode + siren)
Test periodically
Disabled
[6][8][0][5] / [6][8][0][6]
Report to Monitoring
Station enabled when
report code is entered
AC Power Loss
indication
Enabled
LCD message display
during AC power loss
UKCA and CE RED Compliance Statement
Hereby, RISCO Group declares that this equipment is in compliance with the essential requirements of the
UKCA Radio Equipment Regulations 2017 and CE Directive 2014/53/EU.
For the UKCA and CE Declaration of Conformity please refer to our website: www.riscogroup.com