The internal ID number of the I/O Expander. Each wireless device has its own unique
serial number.
Choose if the I/O Expander will be supervised or not.
A user can activate a UO from the bidirectional remote control or keys
on the wireless keypad without the need to enter his user code.
Defines the house code, which matches the code defined by the X-10 modules.
The WiComm Pro enables to activate 8 utility outputs from remote DTMF phone. To
operate a UO via the telephone you must assign a specific UO to a digit on the phone.
Identification
This option provides the ability to identify the serial number of a wireless device in the
system from a keypad or from the configuration software. When using a keypad, follow
this procedure:
1. Go to Programming > Radio Devices Menu > Identification and press . The
following message appears on the keypad LCD:
2. Press the LEARN on the main panel to go into “Learn” mode. The serial number of the
relevant device appears on the keypad LCD.
Please start RF
identification
To Next Page
Loading...
