Page 27
3. Select the wireless device’s index number. Selecting “Automatic” means that the index
number will be automatically assigned by the system.
4. Click ; the main panel acknowledges the transmission with a beep, and the
Radio Device Allocation screen indicates the allocation status as “successful.”
Clearing Device Allocation
Clearing a device’s allocation (deleting a wireless device) can be done either from the
installer keypad or from the Configuration Software.
Clearing a Device Allocation from the Installer Keypad
To clear a device’s allocation from the installer keypad:
1. Go to the Installer menus and select Programming > Radio Device > Modification.
2. Select the device category.
3. Go to the Parameters option.
4. Select the device index number.
5. Select the Serial Number option, and then enter 000000000000.
6. Press ; the device will be deleted, a beep is sounded, and the words “deleted”
appear on the installer keypad to confirm the deletion.
Clearing a Device Allocation with the Configuration Software
To clear a device’s allocation using the Configuration Software:
1. Establish Communication between the main panel and the Configuration Software.
For more information refer to the documentation for the Configuration Software.
2. From the Radio Device Allocation screen, in the Delete Accessories area, enter the
device's serial number, and then click the Delete button.
Clearing All System Device Allocations with the Configuration Software
To clear allocations for all system devices using the Configuration Software:
1. Establish communication between the main panel and the Configuration Software by
selecting Communication > Connect from the main menu. For more information refer
to the documentation for the Configuration Software.
2. From the Radio Device Allocation screen, in the Delete Accessories area, click the
Delete All button. When all accessories have been deleted, the screen indicates that
the deletion has been successful.
To Next Page
Loading...
