1)WiFi
1)Scan Networks: The Control panel scans for Wi-Fi networks and shortly
after available networks appear in a list (the connected network is marked and
appears first in the list). The rest of the list is sorted from high RSSI to low,
with a max. 20 networks.
Scroll to your Router’s Wi-Fi network, select the desired network and then
press [enter].
Enter the Password, if required, and press [enter]. If connection is successful, a
successful message is displayed. If there is a connection failure, an error
message is displayed
2)WPS(Button): Press the WPS button on the router to establish a connection
and then press the WPS button on the panel within 2 min.
A “Successfully Connected” to network message will appear
Allows the setting of the system time and date. This definition is required for setting the
scheduler programming in the system.
To Next Page
Loading...
