Risco RW332M - Communication Modules; GSM;GPRS Communication Module; IP Communication Module

Page 13
Communication Modules
GSM/GPRS
The easily-installed GSM/GPRS plug-in module enables system communication over
2G/3G/4G networks for both users and monitoring stations, for event reporting, system
control, and programming. GSM/GPRS can be used as the primary communication
channel, or as a failure back-up for IP communication channel.
GPRS connectivity enables the system to be constantly connected to the RISCO Cloud,
which in turn enables visual verification to end users and monitoring stations alike and
provides end users with system control via the Smartphone and Web applications.
Cloud-connected users can receive real-time push notification messages to Smartphones,
or e-mail notifications.
Without Cloud connectivity, users can additionally control the system using SMS, and can
also be configured to receive event notifications via SMS, and e-mail (in parallel to the
Cloud-based notifications), depending on system configuration. Reporting events to
monitoring stations is via GPRS or SMS (using the RISCO IP Receiver). Events can be
reported in SIA, SIA IP, and Contact ID monitoring protocols.
IP
The easily-installed IP plug-in module enables system communication over a TCP/IP
network. It can be used as the primary communication channel or as a failure back-up for
GSM/GPRS communication channel.
Using IP connectivity, the system can be constantly connected to the RISCO Cloud server,
which enables visual verification to end users and monitoring stations alike and provides
end users with real-time event reporting and system control via the Smartphone and Web
applications. The IP module also enables users to receive e-mail alerts and system status
information.
The IP module supports common format protocols (SIA, Contact ID) to send alerts to
monitoring stations using the RISCO IP Receiver. In addition, the system can send events
in SIA IP protocol over TCP IP to monitoring stations that have standard receivers which
support IP.
The IP module also enables remote programming of the system main panel using the
Configuration Software over an IP line.