Choose here the image transmitting channel for the http server, subject to the system’s
installed networks.
Note: This feature requires that the monitoring station receiver supports the SIA IP
protocol.
The four options are:
• IP/GPRS: The panel checks for the availability of the IP network. During regular
operation mode images are transmitted using the IP network line. In the case of
trouble in the IP network, the images are routed through the GPRS network.
• GPRS/IP: The panel checks for the availability of the GPRS network. During
regular operation mode all image transmission are carried out using the GPRS.
In the case of trouble, the images are routed through the IP network.
• IP Only: The images are transmitted through the IP network only
• GPRS Only: The images are transmitted through the GPRS network only
Radio Devices
The Radio Devices sub-menu provides access to its following options that are used for
programming, defining and editing each of the system's wireless devices:
1. Allocation
2. Modification
3. Identification
4. Delete
Allocation
Each wireless device must be identified to the system receiver before its parameters can be
configured. See Chapter 9 for further information on allocation procedures.
Modification
The Modification option is used to change the values of the parameters configured by the
system for each wireless device. Modification is comprised of the following:
1. Zones
2. Remote Controls (key fobs)
3. Keypads
To Next Page
Loading...
