Risco RW332M - Page 109

Page 103
Communication: Follow-Me
Parameter
Default
Range
Duress Alarm
Duress alarm in the system from user xx
Yes
No Movement
No movement report indication
No
Arm/Disarm
Arm
Arming operation has been performed in the system
No
Disarm
Disarming operation has been performed in the system
No
Parent Control
System armed/disarmed by user/remote control defined
with the Parent control feature
No
Troubles
False Code
After 5 unsuccessful attempts of entering incorrect code.
No
Main Low Battery
Low battery indication from the WiComm Pro main
panel (below 6V)
No
Wireless Low
Battery
Low battery indication from any wireless device in the
system
No
WL Jamming
Jamming indication in the system
No
WL Lost
Wireless device lost. When no supervision signal is
received from a wireless device
No
AC Off
Interruption in the source of the main AC power. This
activation will follow the delay time predefined in the
AC Loss Delay timer
No
IP Network
Communication trouble with the IP network.
No
GSM
GSM Trouble
General GSM trouble (SIM card fault, Network
availability, Network Quality, PIN code error, Module
communication, GPRS password, GPRS IP fault, GPRS
Connection, PUK code fault
No
SIM Trouble
Any trouble with the SIM card
No
SIM Expire
Report to Follow Me will be established 30 days before
the SIM Expiration Time defined for a prepaid SIM card.
No
SIM Credit
An automatic SMS credit message (or any other
message) received from the provider’s number
predefined in SMS Receive Phone will be transferred to
the Follow Me number
No
Environmental
Gas Alert
Gas (natural gas) alert from a zone defined a Gas
detector
Yes