Used for external panic buttons and wireless panic transmitters.
If violated, an immediate panic alarm is sounded (if the zone sound is not
defined as silent or the Audible Panic system control is enabled), regardless
of the system's state – and a panic report is then send to the monitoring
station. An alarm display will not appear on the keypads.
For external auxiliary emergency alert buttons and wireless auxiliary
emergency transmitters.
If violated, an immediate auxiliary emergency alarm is sounded, regardless
of the system's state and a report is sent to the monitoring station.
For tamper detection. This zone operates the same as 24 hours zone, but it
has a special reporting code.
Note: For this zone type the zone sound is determined according to the Tamper Sound
defined under System > Sound > Tamper
For flood or other types of water detectors. This zone operates the same as
24 hours zone, but it has a special flood report code. See Appendix A -- Report
Codes.
For Gas (natural gas) leak detectors. This zone operates the same as 24 hours
zone, but it has a special gas report code. See Appendix A -- Report Codes.
For CO (Carbon Monoxide) detectors. This zone operates the same as 24
hours zone, but it has a special CO report code. See Appendix A -- Report
Codes.
For detector temperature (hot or cold). This zone operates the same as 24
hours zone, but it has a special report code. See Appendix A -- Report Codes.
For detector temperature (hot or cold). This zone operates the same as 24
hours zone, but it has a special report code. See Appendix A -- Report Codes.
To Next Page
Loading...
