ROBBE FX-20 - Page 76

FX-20
Setting the elevator compensation mix:
Activate the Butter-
fly Mixer:
The allocated control
for the Butterfly Mixer is the Throttle stick with ratchet.
Naturally, a switch
can also be chosen.
Define the Offset for the Butterfly transmitter control. The
Offset defines at which point the control takes affect on the
Ailerons/ Flaps to start moving as airbrakes.
Move the control to
the required position, the position will be shown in the lowest
Display field. e.g. <100%>
Programming example
76
1x
1x
1x
1x
1Sek.