Roche Cedex HiRes - Page 41

35
System Description
B
B
3
After the update of the Firebird database software has fi nished, the following main dialog will appear:
Figure 21
If an older Cedex HiRes Software version 2.x is not installed on the computer, the confi rmation dialog
shown in Figure 21 will not appear. Instead the following dialog will appear:
Figure 22
Should this occur, proceed according to the instructions in the chapter “Installing the Cedex HiRes Software
2.2
” and “Starting up the Software”.
4
By default, Cedex HiRes Software version 2 is installed under the directory C:\Cedex2. If your software
was installed under another directory, the fi eld under the Cedex 2 directory line must be changed to the
appropriate directory. Change the entry in this fi eld by clicking on the change button next to Cedex 2
directory fi eld.
5
By default, the location of the Cedex HiRes Software Database fi le is C:\Cedex2\DB\CEDEX.FDB. If the
database fi le is in a different location, the fi eld under to the Cedex 2 directory must be changed to the
appropriate pathway. Change the Cedex 2 database fi le if it is not C:\Cedex2\DB\CEDEX.FDB by clicking
on the change button next to Cedex 2 database fi le.
6
If the password of the Firebird database administrator SYSDBA has been changed (e.g., because the system
has been made 21 CFR Part 11 compliant), uncheck use standard SYSDBA password (“masterkey”).
In this case, the database password will be requested just before the update is carried out.
To create the backups successfully, it is necessary that the user account used for updating has read
access to the Cedex 2 directory and Cedex HiRes Database fi le. Verify the backup fi les before
proceeding with the update!
7
Click on the Create backup of current installation button (see Figure 21) and select the destination directory
for the backup by clicking on the OK button. A Browse window
will appear in which the destination directory
can be selected, as shown below:
Figure 23

Installing Cedex HiRes Software 2.2 or Updating to Cedex HiRes Software 2.2
Updating Older Cedex HiRes Software version 2.x to Cedex HiRes Software 2.2