Roche Cedex HiRes - Page 42

36
Cedex HiRes Analyzer Operator’s Guide
B
B
8
In the next window, check that the source directory/database fi le and destination (backup) directory settings
are correct. If correct, click on the Ye s button to start the backup.
Figure 24
9
The backup process may take from several minutes up to hours depending on the size of the installation and
the read/write speed of the backup media. A fi le copy dialog will show the backup progress:
Figure 25
10
After successful backup of the installation, the message below will appear. Confi rm by clicking on the OK
button:
Figure 26
11
The update process can now be started. Click on the Update current installation to version 2.2.1 button
as shown below:
Figure 27
12
If you unchecked the use standard SYSDBA password (“masterkey”) checkbox in step 6, enter the
database of the Firebird SYSDBA account and click on the OK button
as shown in the fi gure below:
Figure 28
13
A backup reminder and warning will appear that must be confi rmed by clicking on the YES button:
Figure 29

Installing Cedex HiRes Software 2.2 or Updating to Cedex HiRes Software 2.2
Updating Older Cedex HiRes Software version 2.x to Cedex HiRes Software 2.2