EasyManua.ls Logo

Rohde & Schwarz FSW26 - Page 100

Rohde & Schwarz FSW26
1150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Applications and Operating Modes
R&S
®
FSW
100User Manual 1173.9411.02 ─ 19
3G FDD UE
The 3G FDD UE application requires an instrument equipped with the 3GPP User
Equipment Measurements option, R&S FSW-K73. This application provides test meas-
urements for W-CDMA uplink signals (mobile signals) according to the test specifica-
tion.
For details see the R&S FSW-K72/-K73 User Manual.
Remote command:
INST:SEL MWCD, see INSTrument[:SELect] on page 686
Analog Demodulation
The Analog Demodulation application requires an instrument equipped with the corre-
sponding optional software. This application provides measurement functions for
demodulating AM, FM, or PM signals.
For details see the R&S FSW-K7 User Manual.
Remote command:
INST:SEL ADEM, see INSTrument[:SELect] on page 686
cdma2000 BTS
The cdma2000 BTS application requires an instrument equipped with the cdma2000
BTS Measurements option, R&S FSW-K82. This application provides test measure-
ments for cdma2000 BTS downlink signals (base station signals) according to the test
specification.
For details see the R&S FSW-K82/-K83 User Manual.
Remote command:
INST:SEL BC2K, see INSTrument[:SELect] on page 686
cdma2000 MS
The cdma2000 MS application requires an instrument equipped with the cdma2000
MS Measurements option, R&S FSW-K83. This application provides test measure-
ments for cdma2000 MS uplink signals (mobile signals) according to the test specifica-
tion.
For details see the R&S FSW-K82/-K83 User Manual.
Remote command:
INST:SEL MC2K, see INSTrument[:SELect] on page 686
(Multi-Carrier) Group Delay
The Group Delay application requires an instrument equipped with the Multi-Carrier
Group Delay Measurements option R&S FSW-K17. This application provides a Multi-
Carrier Group Delay measurement.
For details see the R&S FSW-K17 User Manual.
Remote command:
INST:SEL MCGD, see INSTrument[:SELect] on page 686
GSM
The GSM application requires an instrument equipped with the GSM Measurements
option R&S FSW-K10. This application provides GSM measurements.
Available Applications

Table of Contents

Other manuals for Rohde & Schwarz FSW26

Related product manuals