Data Management
R&S
®
FSW
544User Manual 1173.9411.02 ─ 19
QuickSave 1 / ... / QuickSave 10................................................................................ 544
Storage Type (Save only)........................................................................................... 544
Recall.......................................................................................................................... 545
Cancel.........................................................................................................................545
QuickSave 1 / ... / QuickSave 10
Selects one of the save sets to store the current settings in or to be recalled. At the
time of storage, the "QuickSave 1 / ... / QuickSave 10" placeholder is replaced by a
label indicating the storage date and time and the storage type.
During recall, save sets of type "Instrument" replace the settings of the entire instru-
ment. All other save sets start a new measurement channel with the stored settings.
Storage Type (Save only)
Defines which type of settings is to be stored in the save set.
"Instrument
with all chan-
nels"
The instrument settings for all currently active channels are stored.
"Current Chan-
nel"
Only the instrument settings for the currently selected measurement
channel are stored.
Storing and Recalling Instrument Settings and Measurement Data
To Next Page
Loading...
