Rohde & Schwarz SMW-K144 - Page 171

Remote-Control Commands
R&S
®
SMW-K144
171User Manual 1178.8013.02 ─ 06
Parameters:
<ScsUse> 0 | 1 | OFF | ON
Example: See Example "Configuring the TxBWs" on page 149.
Manual operation: See "Use" on page 34
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S120K:NRB?
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S15K:NRB?
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S60K:NRB?
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S30K:NRB?
Queries the number of available resource blocks (N_RB).
Return values:
<NRB> integer
Range: 0 to 273
*RST: 0
Example: See Example "Configuring the TxBWs" on page 149.
Usage: Query only
Manual operation: See "N_RB" on page 34
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S120K:OFFSet <ScsOffset>
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S15K:OFFSet <ScsOffset>
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S60K:OFFSet <ScsOffset>
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S30K:OFFSet <ScsOffset>
Sets the offset between the usable RB and the common RBs.
Parameters:
<ScsOffset> float
Range: 0 to 9
Increment: 1
*RST: 0
Example: See Example "Configuring the TxBWs" on page 149.
Manual operation: See "TxBW Offset" on page 34
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S120K:KOMU?
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S15K:KOMU?
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S60K:KOMU?
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S30K:KOMU?
Queries the value of the parameter k
0
μ
.
Return values:
<KoMu> integer
Range: -6; 0; 6 further values indicate conflict
*RST: 0
TxBW Commands