Rohde & Schwarz SMW-K144 - Page 223

Remote-Control Commands
R&S
®
SMW-K144
223User Manual 1178.8013.02 ─ 06
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:PDSCh|PUSCh:DMRS:SLTSymbols?
Queries the slot number of DMRS symbols.
Return values:
<PxschDmrsSlotSy> string
Range: 0 char to 256 char
Example: See Example "Configuring the PDSCH incl. PTRS settings"
on page 153.
Usage: Query only
Manual operation: See "Slot Symbols" on page 92
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:PDSCh|PUSCh:DMRS:POWer <DmrsPower>
Sets the power of the PDSCH/PUSCH, relative to the power of the other channels.
Parameters:
<DmrsPower> float
Range: -80.00 to 10.00
Increment: 0.001
*RST: 0
Example: See Example "Configuring the PDSCH incl. PTRS settings"
on page 153.
Manual operation: See "Power" on page 92
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:PDSCh|PUSCh:TXSCheme:NLAYers
<TxNumLayers>
For DCI format 0_1, sets the number of precoding layers.
Parameters:
<TxNumLayers> integer
Range: 1 to 8
*RST: 1
Example: See Example "Configuring the PDSCH incl. PTRS settings"
on page 153.
Manual operation: See "Number of Layers" on page 90
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:PDSCh|PUSCh:TXSCheme:CDMData
<CDMGroupData>
For DCI format 0_1, sets the number of DMRS CDM groups without data.
PDSCH/PUSCH Commands