2
Basic
Operation
Loading Media
51
3.
Clamp the edges of the media with the media clamp.
How to set the media clamp.
How to remove the media clamp.
Important notice about the media clamp.
Insert the media clamps rmly all the way until they engage with an audible click, and make sure
they will not come loose. Incorrect mounting may cause the media to catch or snag and make
correct printing impossible, or may lead to malfunction or poor printing quality.
If the thickness of the sheet media is 0.5 millimeters or more, leave the media clamps unattached.
Otherwise the print heads may strike the media clamps, resulting in malfunction or other prob-
lems.
When you’re performing cutting only, never use the media clamps.
P. 69, "Important Note on Cutting"
Insert until it clicks into place.
Push here.
Pull back while holding down the area.
To Next Page
Loading...
Need help?
General