RS PRO IIT-2000 - Function:test

IIT-2000/2010/5000/5010 Instruction Manual/English
05/08/2015 Version No. 001 149
Function Commands
FUNCtion:TEST .................................................................................................... 149
MEASure<x> ......................................................................................................... 150
MAIN:FUNCtion .................................................................................................... 151
FUNCtion:TEST
Set
Query
Description
Turns the currently selected test (output) on or off.
When HOLD is displayed on the screen during AUTO tests, use
the FUNCtion:TEST command to move on to the next step.
Setting the FUNCtion:TEST command to OFF at the end of a test
will also temporarily turn the PASS/FAIL buzzer sound off.
Syntax
Query Syntax
FUNCtion:TEST {ON|OFF}
FUNCtion:TEST?
Parameter
ON
Turns the test on.
OFF
Turns the test off.
Return
parameter
TEST ON
Test is on.
TEST OFF
Test is off.