IIT-2000/2010/5000/5010 Instruction Manual/English
05/08/2015 Version No. 001 27
Workplace Precautions
The IIT-2000/2010/5000/5010 is a high voltage instrument that
outputs dangerous voltages. The following section describes
precautions and procedures that must be followed to ensure a
safe work environment.
The IIT-2000/2010/5000/5010 generates voltages in excess of
5kVAC or 6kVDC. Follow all safety precautions, warnings and
directions given in the following section when using the
instrument.
1. Only technically qualified personnel should be allowed to
operate the safety tester.
2. The operating workplace must be fully isolated, especially
when the instrument is in operation. The instrument should be
clearly labeled with appropriate warning signage.
3. The operator should not wear any conductive materials,
jewelry, badges, or other items, such wrist watches.
4. The operator should wear insulation gloves for high voltage
protection.
To Next Page
Loading...
