RS PRO IIT-2000 - Setting MAX HOLD

IIT-2000/2010/5000/5010 Instruction Manual/English
05/08/2015 Version No. 001 65
Setting MAX HOLD
Background
The MAX HOLD setting will hold the maximum current
measured in the ACW and DCW tests or the maximum
resistance measured in IR and GB tests.
Steps
1. Press the UTILITY key on the front panel when the
tester is in EDIT status. The display will go from the
normal EDIT status to the MANU Utility menu for
the current test .
UTILITY
L I T Y IM A UN U T 2M A N U = * * * - 0 0
A R C M D E : OO FF
G R O U N D MO
P A S S H L D :O O FF
F A I L M D E :O
PS T O
M A X H O L D : O F F
D E : NO
Note
The MANU UTILITY settings only apply to the selected MANU
test.
2. Use the UP/DOWN arrow keys to move to the MAX
HOLD setting.
3. Use the scroll wheel to set MAX HOLD.
MAX HOLD
OFF, ON