RS PRO IIT-2000 - Edit Automatic Test Settings

IIT-2000/2010/5000/5010 Instruction Manual/English
94 05/08/2015 Version No. 001
2. Use the scroll wheel to choose the AUTO number.
AUTO #
001~100
I R G B A CW D C W
E
F R E Q = 0 H z 6
0 100
k V
EIV
MT I E = 0 0 1 . 0 SR
0 0 m AER F =# 0 .0
1 . 0 0 m AIH ES = 0T
0 0 . 1 S0A M P =R
W
MA U OT N A_0A U T O = 0 0 1 - 1 0
AUTO number
m A
Note
The AUTO number can only be chosen in VIEW status. If in
the EDIT status, switch to the VIEW status by pressing the
EDIT/SAVE or ESC key.
Edit Automatic Test Settings
Background
To edit an automatic test, the tester must be in EDIT status.
Any settings or parameters that are edited only apply to the
currently selected AUTO number.
Steps
1. Press the EDIT/SAVE key when in VIEW status to
enter the EDIT status. This will enter the EDIT
status for the chosen AUTO number.
EDIT/SAVE