RS PRO IIT-2000 - Declaration of Conformity

IIT-2000/2010/5000/5010 Instruction Manual/English
05/08/2015 Version No. 001 215
Declaration of Conformity
We
declare that the below mentioned product
Type of Product: Electrical Safety Tester
Model Number: IIT-5000, IIT-5010
are herewith confirmed to comply with the requirements set out in the Council Directive on
the Approximation of the Law of Member States relating to Electromagnetic Compatibility
(2014/30/EU) and Low Voltage Directive (2014/35/EU).
For the evaluation regarding the Electromagnetic Compatibility and Low Voltage Directive,
the following standards were applied:
◎ EMC
EN 61326-1
EN 61326-2-1
Electrical equipment for measurement, control and laboratory use ––
EMC requirements (2013)
Conducted Emission
Radiated Emission
EN55011: 2009+A1: 2010 Class A
Electrical Fast Transients
EN 61000-4-4: 2012
Current Harmonics
EN 61000-3-2: 2006+A2:2009
Surge Immunity
EN 61000-4-5: 2006
Voltage Fluctuations
EN 61000-3-3: 2008
Conducted Susceptibility
EN 61000-4-6: 2009
Electrostatic Discharge
EN 61000-4-2: 2009
Power Frequency Magnetic Field
EN 61000-4-8: 2010
Radiated Immunity
EN 61000-4-3: 2006 +A2:2010
Voltage Dip/ Interruption
EN 61000-4-11: 2004
Low Voltage Equipment Directive 2014/35/EU
Safety Requirements
EN 61010-1: 2010/ EN 61010-2-030: 2010