RS PRO IIT-2000 - Manu:ir:ref

IIT-2000/2010/5000/5010 Instruction Manual/English
170 05/08/2015 Version No. 001
MANU:IR:REF
Set
Query
Description
Sets or returns the IR reference value in MΩ (IIT-2010) or
(IIT5010). The test must first be in IR mode before this command
can be used.
The reference value must be lower than the HI SET value.
Syntax
Query Syntax
MANU:IR:REF <NR1>
MANU:IR:REF?
Parameter/
Return
parameter
<NR1>
IIT-2010 only:
0000 ~ 9999 (unit = MΩ)
IIT-5010 only:
Format A: 0 ~ 50.00 (unit = GΩ)
Format B: 0G ~ 50.00G
Format C: 0M ~ 50000M
Example
(IIT-2000/2010)
MANU:IR:REF 900
Sets the IR reference to 900 MΩ.
Example
(IIT-5000/5010)
MANU:IR:REF 0.900
Sets the IR reference to 900 MΩ.
GΩ