RS PRO IIT-2000 - Running an Automatic Test

IIT-2000/2010/5000/5010 Instruction Manual/English
102 05/08/2015 Version No. 001
Note
The next time the automatic test is run, the steps with
asterisks will be skipped.
Delete a Test
Step
1. Use the UP/DOWN and LEFT/RIGHT arrow
keys to move the cursor to the test step you
wish to delete.
2. Press the DEL soft-key.
D E L
3. The step will be deleted.
Save Changes
and Exit
To save the changes made in Page View, press
the EDIT/SAVE key. You will be returned back to
AUTO mode/VIEW status.
EDIT/SAVE
Cancel and Exit
Page View
To cancel any changes and to exit the Page
View, press the ESC key. You will be returned
back to AUTO mode/VIEW status.
ESC
Running an Automatic Test
Background
An automatic test can be run when the tester is in READY
status.
Note
The tester cannot start to run an AUTO test under the