RS PRO IIT-2000 - Sweep:start:time

IIT-2000/2010/5000/5010 Instruction Manual/English
05/08/2015 Version No. 001 183
Example
SWEEP:GRAP:LINE 3
Turns all the graph lines on.
SWEEP:STARt:TIME
Set
Query
Description
Sets or returns the start time (STA.t) of the sweep graph in
milliseconds.
This setting will also set what the time will be for the first point for
the sweep data that is returned in the SWEEP:DATA:SHOW
query.
Syntax
Query Syntax
SWEEP:STARt:TIME <NR2>
SWEEP:STARt:TIME ?
Parameter/
Return
parameter
<NR2>
0.1~1999.8 seconds
Example
SWEEP:STARt:TIME 1000.0
Sets the sweep start time to 1000 seconds.