RS PRO IIT-2000 - Sweep:data:status

IIT-2000/2010/5000/5010 Instruction Manual/English
05/08/2015 Version No. 001 179
Sweep Commands
SWEEP:DATA:STATus ........................................................................................ 179
SWEEP<X>:DATA:SHOW .................................................................................... 180
SWEEP:GRAPh:SHOW ........................................................................................ 181
SWEEP :GRAPh:LINE .......................................................................................... 182
SWEEP:STARt:TIME ............................................................................................ 183
SWEEP:DATA:STATus
Query
Description
Returns the sweep mode, the voltage and current settings and
the number data points that are used in the last sweep. There
can be a maximum of 190 data points, depending on the testing
time.
The data is returned as a string in the following format:
SWEEP MODE,VSET,ISET,Get Data[#data points].
Query Syntax
SWEEP:DATA:STATus?
Return
parameter
<string>
SWEEP MODE, VSET+unit, ISET+units, Get
Data=number of data points
Example
SWEEP:DATA:STATus?
>ACW,V=0.108kV,HI=10.96 mA ,Get Data=011