IIT-2000/2010/5000/5010 Instruction Manual/English
05/08/2015 Version No. 001 195
FAQ
The tester will not turn on.
The panel keys are not working.
When I press the START button the tester will not start testing?
The accuracy does not match the specification.
The tester will not turn on.
Ensure the power cord is connected. Ensure the line input is set to the correct line
voltage. Check to make sure the fuse is not blown. See page 197.
The panel keys are not working.
Ensure the tester is not in remote mode, page 134.
Ensure the tester is not in SIGNAL I/O or Remote Connect mode, page 117.
To Next Page
Loading...
