RS PRO IIT-2000 - Sre

IIT-2000/2010/5000/5010 Instruction Manual/English
190 05/08/2015 Version No. 001
*SRE
Query
Description
AUTO MODE only. Use this command to get measurement step
number at the current point in time during AUTO MODE testing.
Example: User send command “*SRE” to IIT-20X0/50X0 during
AUTO mode
Query Syntax
*SRE?
Return
parameter
<NR1>
00~16
Example
*SRE?
>5
The current test step is number 5. This indicates that steps 1~4
have already been completed and the results for those steps can
now be retrieved.