Ruijie RG-S2900G-E Series - Page 128

Configuration Guide Threshold Configuration
Default Configuration
The following table lists the default configuration for the threshold:
Function
Default Value
CPU utilization threshold
Warning threshold: 90; Critical threshol:100.
Memory utilization threshold
Warning threshold: 90; Critical threshol:100.
Temperature threshold
Warning threshold: 90; Critical threshol:100.
Threshold Configuration
This section describes how to configure the threshold:
 Configure the CPU utilization threshold
 Configure the memory utilization threshold
 Configure the temperature threshold
 View the configuration
Configuring the CPU Utilization Threshold
Command
Purpose
Ruijie# configure terminal
Enter the global configuration mode.
Ruijie(config)# threshold set cpu [M1
| M2 | slot n | member n]
warning_value critical_value
Specify the warning threshold and critical
threshold of the CPU utilization for the specific
device, in the range of 1-100.
Use the no threshold set cpu command to return to the default configuration.
Configuring the Memory Utilization Threshold
Command
Purpose
Ruijie# configure terminal
Enter the global configuration mode.
Ruijie(config)# threshold set memory
[M1 | M2 | slot n | member n]
warning_value critical_value
Specify the warning threshold and critical
threshold of the memory utilization for the
specific device, in the range of 1-100.
Use the no threshold set memory command to return to the default configuration.
Configuring the Temperature Threshold
Command
Purpose
Ruijie# configure terminal
Enter the global configuration mode.
Ruijie(config)# threshold set
temperature [M1 | M2 | slot n |
member n] warning_value
critical_value
Specify the warning threshold and critical
threshold of the temperature utilization for the
specific device, in the range of 1-100.
Use the no threshold set temperature command to return to the default configuration.