Configuration Guide System Management Display Configuration
Oct 20 15:47:01 %SYSCHECK-5-CPU_USING_RATE: CPU utilization in one minute : 95% ，
Using most cpu's task is ktimer : 94%
If the CPU utilization is lower than 70%, the system prompts:
Oct 20 15:47:01 %SYSCHECK-5-CPU_USING_RATE: CPU utilization in one minute :68% ，
Using most cpu's task is ktimer : 60%
Oct 20 15:47:01 %SYSCHECK-5-CPU_USING_RATE: The CPU using rate has down!
System Memory Display
Configuration Task List
Show the usage of system memory
Showing the Usage of System Memory
Use the show memory command to show the usage and status of system memory:
Show the usage of system memory.
By default, the switch name is Ruijie.
Below is the result of executing this command:
Ruijie#show memory
System Memory Statistic:
Free pages: 13031
watermarks : min 378, lower 756, low 1534, high 1912
System Total Memory : 128MB, Current Free Memory : 54892KB
Used Rate : 58%
The above information includes the following parts:
1. Free pages: the memory size of one free page is about 4k;
2. Watermarks(see the following table)
The memory resources are extremely insufficient. It can
only keep the kernel running. All application modules
fails to run if the minimum watermark has been reached.
To Next Page
Loading...
