Ruijie RG-S2900G-E Series - Showing Dhcp Snooping Configuration

Configuration Guide DHCP Snooping Configuration
DHCP snooping Support Bootp bind status : ENABLE
Interface Trusted Rate limit (pps)
------------------------ ------- ----------------
GigabitEthernet 4/1 NO 100
Clearing Dynamic User Information from the DHCP Snooping Binding Database
To clear dynamic user information from the DHCP Snooping binding database, execute the
following command.
Command
Description
Ruijie# clear ip dhcp snooping binding
Clear information from the current database.
The following example shows how to clear information from the current database manually:
Ruijie# clear ip dhcp snooping binding
Showing DHCP Snooping Configuration
Showing DHCP Snooping
To show DHCP Snooping, execute the following command:
Command
Description
Ruijie# show ip dhcp snooping
Show the configuration of DHCP snooping.
For example:
Ruijie# show ip dhcp snooping
Switch DHCP snooping status : ENABLE
DHCP snooping Verification of hwaddr fieled status : DISABLE
DHCP snooping database wirte-delay time : 0 seconds
DHCP snooping option 82 status : ENABLE
DHCP snooping Support Bootp bind status : ENABLE
Interface Trusted Rate limit (pps)
------------------------ ------- ----------------
GigabitEthernet 4/1 NO 100
Showing the DHCP Snooping Binding Database
To show the DHCP Snooping binding database, execute the following command:
Command
Description
Ruijie# show ip dhcp snooping binding
View the static user information in the DHCP
Snooping binding database.
For example:
Ruijie# show ip dhcp snooping binding
Total number of bindings: 1
MacAddress IpAddress Lease(sec) Type VLAN Interface
------------------ --------------- ------------ ------------- ----- --------------------