Ruijie RG-S2900G-E Series - Display Gvrp Status

Configuration Guide GVRP Configuration
Interface GigabitEthernet 3/1
RecValidGvrpPdu 0
RecInvalidGvrpPdu 0
RecJoinEmpty 0
RecJoinIn 0
RecEmpty 0
RecLeaveEmpty 0
RecLeaveIn 0
RecLeaveAll 0
SentGvrpPdu 0
SentJoinEmpty 0
SentJoinIn 0
SentEmpty 0
SentLeaveEmpty 0
SentLeaveIn 0
SentLeaveAll 0
JoinIndicated 0
LeaveIndicated 0
JoinPropagated 0
LeavePropagated 0
To clear all GVRP statistics so that it will restart calculation:
Command
Function
Ruijie# clear gvrp statistics {interface-id | all}
Clear all statistics for the port
Example of clearing GVRP statistics for port 1:
Ruijie# clear gvrp statistics gigabitethernet 1/1
Display GVRP status
Execute "show gvrp status" command to display the current GVRP status. This
command can be used to display the dynamic ports of dynamically created VLANs and
static VLANs.
Command
Function
Ruijie# show gvrp status
Display current GVRP status
Configuration example:
Ruijie# show gvrp status
VLAN 1
Dynamic Ports:
DVLAN 5
Dynamic Ports: